Разборка Dreame T20 (disassembly)

Introduction

This tutorial provides a detailed step-by-step guide for disassembling the Dreame T20 vacuum cleaner. Disassembling your vacuum can help with maintenance, repairs, or upgrades. By following this guide, you’ll learn how to safely take apart the Dreame T20 and understand its components.

Step 1: Gather Necessary Tools

Before starting the disassembly, ensure you have the following tools ready:

• Phillips screwdriver
• Flathead screwdriver
• Plastic prying tools (optional)
• Container for screws and small parts

Step 2: Prepare the Workspace

A clean and organized workspace is crucial for an effective disassembly process. Follow these guidelines:

• Choose a flat surface with good lighting.
• Lay down a cloth or mat to prevent scratches and keep parts organized.
• Keep your tools within reach.

Step 3: Remove the Dust Container

Start by detaching the dust container:

• Locate the release button on the dust container.
• Press the button and pull the container away from the main body.
• Empty the dust and clean the container if necessary.

Step 4: Unscrew the Main Body

Next, unscrew the main body of the vacuum:

• Use a Phillips screwdriver to remove all visible screws.
• Keep the screws in a container to avoid losing them.
• Check for hidden screws under any labels or stickers.

Step 5: Separate the Front Cover

Once the screws are removed, detach the front cover:

• Carefully use a plastic prying tool to gently separate the cover from the main body.
• Work your way around the edges to avoid damaging the clips.

Step 6: Access the Inner Components

With the front cover removed, you can now access the inner components:

• Identify the motor, battery, and circuit board.
• Take note of how components are connected; you may want to take pictures for reference.

Step 7: Disconnect the Battery

If you need to replace or check the battery:

• Carefully disconnect the battery connector using a flathead screwdriver.
• Remove any screws securing the battery and lift it out.

Step 8: Clean or Replace Components

Depending on your needs, you may want to clean or replace components:

• Use compressed air to clean dust from the motor and circuit board.
• If replacing parts, ensure you have compatible replacements.

Step 9: Reassemble the Vacuum

After completing your maintenance:

• Reverse the disassembly steps to reassemble the vacuum.
• Make sure all screws are securely fastened and connectors are properly attached.

Conclusion

You’ve successfully disassembled and reassembled your Dreame T20 vacuum cleaner. Regular maintenance can extend the life of your device and improve its performance. For further repairs or upgrades, always consult the user manual or seek professional help if needed. Happy cleaning!