Cara Membuat Pola dasar badan dengan 2 kupnat atau Pola Blus | Bagian Depan ( PART I)

Introduction

This tutorial will guide you through creating a basic body pattern with two darts, specifically for the front section of a blouse. The method is designed to be straightforward and accessible for all skill levels. You will learn how to incorporate measurements and ease into your pattern, making it adaptable for various designs, including princess lines and bustier styles.

Step 1: Gather Materials

Before you start, ensure you have the following materials:

• Pattern paper or drafting paper
• Ruler or straight edge
• Measuring tape
• Pencil
• French curve (for curved lines)
• Scissors
• Basic knowledge of body measurements (bust, waist, hip)

Step 2: Take Accurate Measurements

To create a well-fitted pattern, take the following measurements:

1. Bust circumference
2. Waist circumference
3. Hip circumference
4. Bust point to bust point distance
5. Waist to hip distance
6. Desired blouse length

Make sure to add ease to your measurements for comfort:

• Bust: add 4-6 cm
• Waist: add 2-4 cm
• Hip: add 4-6 cm

Step 3: Draw the Basic Block

1. Create the Center Line:

   • Draw a vertical line on your pattern paper. This will serve as the center front of the blouse.

2. Mark the Bust Line:

   • Measure down from the top of the center line the distance of your desired blouse length.
   • Mark the bust line.

3. Draw the Waist and Hip Lines:

   • From the bust line, measure down to mark the waist line.
   • From the waist line, measure down again to mark the hip line.

4. Add Measurements:

   • Starting from the center line, mark half of your bust measurement on the bust line.
   • Mark half of your waist measurement on the waist line.
   • Mark half of your hip measurement on the hip line.

Step 4: Shape the Side Seams

1. Connect the Points:

   • Use a ruler to draw straight lines connecting the bust, waist, and hip points.

2. Create Darts:

   • Mark the dart width on the bust and waist lines.
   • From the bust point, draw lines to create the dart, typically about 10-12 cm long.

3. Adjust the Curves:

   • Use a French curve to smooth the lines from bust to hip for a more natural shape.

Step 5: Finalize the Pattern

1. Seam Allowances:

   • Add seam allowances (usually 1.5 cm) around the edges of your pattern.

2. Cut Out the Pattern:

   • Carefully cut out your pattern from the paper.

3. Label the Pattern:

   • Clearly label the pattern with size, darts, and any other relevant information for future reference.

Conclusion

You have now created a basic body pattern for a blouse with two darts. This foundational pattern can be modified for various designs by adjusting the darts or adding details. As a next step, consider practicing with fabric to see how the pattern translates into a finished garment. Enjoy the process and happy sewing!