QT. #3 IKEA | Adding Wheels to the NORDEN Gateleg Table

Introduction

This tutorial provides a step-by-step guide on how to add wheels to the IKEA NORDEN Gateleg table. Enhancing the mobility of this sturdy table can make it much easier to maneuver in any space, especially in a craft room. With just a few materials and simple tools, you can transform your NORDEN table, making it more functional and user-friendly.

Step 1: Gather Your Materials

Before starting the project, ensure you have the following items:

• 6 wheels (1-inch size recommended)
• Locking wheels (for stability)
• A drill
• Screws (usually included with wheels)
• Screwdriver
• Measuring tape
• Marker or pencil

Tip: Purchase two sets of wheels to have enough for the project. Locking wheels should only be installed on the legs that do not meet the table top support.

Step 2: Prepare the Table

1. Clear the Table: Remove any items from the table to prevent accidents while you work.
2. Flip the Table Over: Carefully turn the table upside down on a soft surface to avoid scratches.

Step 3: Measure and Mark Wheel Placement

1. Decide Wheel Locations: Choose which legs will have wheels. Typically, wheels should be placed on the outer legs.
2. Measure for Accuracy: Use a measuring tape to determine where the wheels will be attached. Mark the spots with a pencil or marker.

Step 4: Attach the Wheels

1. Drill Holes: Using the drill, create holes in the marked spots where the wheels will go. Ensure the holes are deep enough for screw insertion but be cautious not to drill through the table.
2. Attach Wheels: Align each wheel with the drilled holes and secure them using screws. Make sure to use locking wheels for added stability on the designated legs.

Step 5: Test Stability

1. Flip the Table Upright: Once all wheels are attached, carefully turn the table back to its upright position.
2. Check Mobility: Push the table gently to ensure the wheels roll smoothly. Lock the wheels to test stability when needed.

Conclusion

By following these steps, you can easily add wheels to your IKEA NORDEN Gateleg table, making it more versatile for various uses. Remember to regularly check the tightness of the screws and the functionality of the wheels to maintain stability. Enjoy the enhanced mobility and convenience of your newly modified table!