How to Replace Front Fender Liner 2012-2020 Ford Focus

Introduction

Replacing the front fender liner on a 2012-2020 Ford Focus is an essential maintenance task that protects your vehicle's body and engine compartment from debris, water, and dirt. This guide will walk you through the steps to successfully install a new fender liner, ensuring your car remains in good condition.

Step 1: Gather the Necessary Tools

Before starting the replacement, ensure you have the following tools on hand:

• 19mm socket
• Trim tool set
• 3/8 inch impact gun
• T30 bit
• Ratchet
• Torque wrench

These tools will help you remove the old liner and securely install the new one.

Step 2: Prepare the Vehicle

1. Park Safely: Ensure your vehicle is parked on a flat surface and is not running.
2. Secure the Vehicle: If needed, use wheel chocks to prevent rolling.
3. Open the Hood: This will give you better access to the area where the fender liner is located.

Step 3: Remove the Old Fender Liner

1. Locate Fasteners: Identify the screws or clips securing the fender liner.
2. Use the Trim Tool: Carefully pry off any plastic clips using the trim tool. This will help avoid damage to the surrounding areas.
3. Unscrew the Bolts: Use the 19mm socket and ratchet to remove any bolts holding the liner in place.
4. Detach the Liner: Once all fasteners are removed, carefully pull the liner away from the fender and discard it.

Step 4: Install the New Fender Liner

1. Position the New Liner: Align the new fender liner with the mounting points in the fender.

Secure with Fasteners

• Replace the bolts using the 19mm socket.
• Insert and secure the plastic clips with your trim tool.
2. Check Alignment: Ensure that the liner is properly seated and aligned with the vehicle's body.

Step 5: Finalize Installation

1. Torque the Bolts: Use a torque wrench to tighten the bolts to the manufacturer’s specifications. This ensures they are secure without being over-tightened.
2. Inspect the Installation: Double-check that all clips and screws are in place and the fender liner is secure.

Conclusion

Congratulations! You have successfully replaced the front fender liner on your 2012-2020 Ford Focus. This maintenance task helps protect your vehicle from environmental damage. For future maintenance, consider regularly inspecting your fender liners and other protective components for signs of wear or damage. If you have further repairs or upgrades planned, consult additional resources or tutorials for guidance.