Owl/CAV Stop Stay Sprinter Door Struts Install

Introduction

This tutorial will guide you through the installation of the Owl/CAV Stop Stay Sprinter Door Struts, a useful upgrade for your van. These struts allow you to hold your rear doors open securely, preventing them from closing unexpectedly due to wind or uneven ground. This installation is straightforward and can significantly enhance your van's functionality.

Step 1: Gather Your Tools and Materials

Before starting the installation, ensure you have all the necessary tools and materials ready. You will need:

• Owl/CAV Stop Stay Door Struts
• Phillips screwdriver
• Torque wrench
• 10mm socket and ratchet
• Safety glasses

Tip:

Always wear safety glasses when working with tools to protect your eyes.

Step 2: Prepare Your Van

1. Park your van on level ground to ensure stability during installation.
2. Open the rear doors fully to access the hinges and areas where the struts will be installed.
3. Secure the doors with a prop or have someone hold them open while you work.

Step 3: Remove the Existing Struts

1. Locate the factory struts attached to the hinges.
2. Using a Phillips screwdriver, remove the screws securing the struts.
3. Gently pull the struts away from the mounting points.

Common Pitfall:

Be careful when removing the struts, as they may be under tension.

Step 4: Install the New Struts

1. Position the new Owl/CAV struts on the same mounting points where the factory struts were attached.
2. Align the holes of the struts with the mounting points.
3. Secure the struts using the screws provided, tightening them with a torque wrench to the manufacturer's specifications.

Tip:

Double-check the alignment before fully tightening to ensure the struts operate correctly.

Step 5: Test the Struts

1. Gently open the rear doors to check if the struts hold them in place securely.
2. Test the doors in various positions (angled and straight) to ensure they remain open without assistance.
3. Make adjustments if necessary by loosening the screws and repositioning the struts.

Conclusion

Installing the Owl/CAV Stop Stay Sprinter Door Struts is a simple upgrade that provides significant benefits for your van. By following these steps, you can ensure your rear doors stay open safely, enhancing your van experience. If you encounter any issues during installation, revisit the steps, or consult the product manual for further guidance. Enjoy your newly upgraded van!