CARA MEMBUAT PEMBERSIH SEPATU TEKSTUR KENTAL DAN BENING BISA UNTUK BAGIAN BAWAH I PAIJO TUTORIAL

Introduction

In this tutorial, we will learn how to create a thick and clear shoe cleaner suitable for cleaning the soles of shoes. This DIY cleaner uses simple ingredients that are effective in removing dirt while being gentle on your footwear. Follow the steps carefully to prepare your homemade shoe cleaner.

Step 1: Gather Your Ingredients

Before starting, ensure you have all the necessary ingredients on hand. You will need:

• Texapon (a surfactant for cleaning)
• Sodium bicarbonate (baking soda)
• Oxyboost 3% (a bleaching agent)
• Water-based fragrance (optional for scent)
• EDTA preservative (to extend shelf life)
• Aquades water (distilled or purified water)

Step 2: Measure the Ingredients

Accurate measurements are crucial for the effectiveness of your cleaner. Here’s a general guideline for the amounts you might need:

1. Texapon: 100 ml
2. Sodium bicarbonate: 50 grams
3. Oxyboost 3%: 30 ml
4. Water-based fragrance: 5-10 ml (adjust to your preference)
5. EDTA: 2 grams
6. Aquades water: 1 liter

Make sure to adjust the quantities based on how much cleaner you want to make.

Step 3: Mix the Ingredients

Carefully combine the ingredients in a clean container:

1. Start by adding the Aquades water to the container.
2. Gradually add the Texapon while stirring gently.
3. Next, incorporate the sodium bicarbonate, ensuring it dissolves completely.
4. Slowly mix in the Oxyboost 3% and stir well.
5. If desired, add the water-based fragrance and the EDTA. Stir until everything is well combined.

Step 4: Transfer to a Bottle

Once the mixture is homogeneous:

1. Use a funnel to pour the shoe cleaner into a clean spray bottle or squeeze bottle for easy application.
2. Ensure the bottle is labeled for easy identification.

Step 5: Test the Cleaner

Before using it on your shoes, perform a patch test:

1. Apply a small amount of the cleaner on an inconspicuous area of the shoe.
2. Wait for a few minutes to check for any adverse reactions.

If there are no issues, your cleaner is ready for use.

Step 6: Application

To clean your shoes:

1. Shake the bottle well before use.
2. Spray or apply the cleaner onto the shoe soles.
3. Use a soft brush or cloth to scrub gently.
4. Rinse with clean water to remove any residue and let the shoes dry.

Conclusion

You have now created an effective shoe cleaner that is both thick and clear. This cleaner will help maintain the appearance of your shoes and extend their lifespan. Store the cleaner in a cool, dry place, and remember to shake it before each use. Enjoy your clean and fresh-looking shoes!