How to load your media on a Roland TrueVis printer
3 min read
8 days ago
Published on May 30, 2025
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Introduction
This tutorial will guide you through the process of loading media onto a Roland TrueVis printer. Properly loading media is crucial for achieving high-quality prints and ensuring smooth operation of your printer. Follow these steps to successfully load your media and avoid common pitfalls.
Step 1: Prepare the Media
- Select the Right Media: Ensure you are using compatible media for your Roland TrueVis printer. Check the specifications in your printer's manual or on the manufacturer's website.
- Unroll the Media: Carefully unroll the media and place it on a flat surface. Make sure there are no wrinkles or damage.
- Cut the Leading Edge: Trim the leading edge of the media to create a straight edge. This will facilitate easier loading into the printer.
Step 2: Load the Media into the Printer
- Open the Printer’s Media Holders: Locate the media holders on your Roland TrueVis printer and open them fully.
- Align the Media: Position the media so that the leading edge is aligned with the media feed guide.
- Insert the Media: Gently feed the media into the printer until it reaches the rollers. The printer will automatically detect the media.
Step 3: Adjust the Media Settings
- Access the Printer Menu: Use the printer's control panel to access the media settings.
- Select Media Type: Choose the correct media type from the options available. This ensures the printer uses the appropriate settings for your media.
- Set Media Width: Confirm the width of the media to ensure it is properly recognized by the printer.
Step 4: Perform a Test Print
- Run a Test Print: Before starting your actual print job, execute a test print to check for any loading issues or alignment problems.
- Inspect the Output: Evaluate the print quality and ensure that the media is loaded correctly. Look for even ink distribution and alignment.
Step 5: Troubleshooting Common Issues
- Media Not Feeding: If the media does not feed into the printer, double-check the alignment and ensure the leading edge is straight.
- Print Quality Issues: If you notice streaks or uneven color, verify that you have selected the correct media type and that the print heads are clean.
Conclusion
Successfully loading media onto your Roland TrueVis printer is essential for achieving the best print results. Remember to prepare your media properly, adjust the printer settings accordingly, and always conduct a test print before starting your job. By following these steps, you can ensure smooth operations and high-quality outputs. For further learning, explore additional tutorials on the Signmaster Systems channel.