Swapping Schlage deadbolt cylinders and tailpieces
2 min read
6 months ago
Published on Jul 03, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Tutorial: Swapping Schlage Deadbolt Cylinders and Tailpieces
Step 1: Gather the Necessary Tools
- Make sure you have a wizzy Schlage electronic lock and the existing deadbolt you want to swap the key cylinder with.
- Have a screwdriver ready for removing and installing the cylinder and tailpiece.
Step 2: Remove the Existing Key Cylinder
- Identify the key cylinder in the existing deadbolt and note the tailpiece attached to it.
- Locate and remove the capture screw that holds the cylinder in place.
- Take out the old cylinder carefully.
Step 3: Swap the Key Cylinder
- Compare the old cylinder with the new one to ensure compatibility.
- Insert the old cylinder into the new deadbolt to use the same key.
- Secure the cylinder in place by tightening the capture screw.
Step 4: Test the Deadbolt
- Test the deadbolt to ensure the key turns smoothly and the lock functions properly.
- Check if the deadbolt strike aligns correctly with the door frame.
Step 5: Troubleshoot Tailpiece Compatibility
- If the deadbolt strike does not align properly, it may be due to the tailpiece.
- Remove the tailpiece from the new deadbolt using a pin or probe to spin off the nut.
- Compare the tailpieces of the old and new cylinders to determine any differences.
Step 6: Swap the Tailpieces
- Exchange the tailpieces between the old and new cylinders to adjust the depth for proper alignment.
- Install the new tailpiece on the old cylinder to ensure compatibility with the new lock.
Step 7: Reassemble and Test
- Follow the instructions to reassemble all components securely.
- Test the deadbolt with the thumb knob, key, and button to ensure smooth operation.
Step 8: Final Check
- Verify that the deadbolt functions correctly with the new key cylinder and tailpiece.
- Make any necessary adjustments for a secure and functional lock system.
By following these steps, you can successfully swap Schlage deadbolt cylinders and tailpieces to upgrade your existing lock system.