COMO TOCAR ÓLEO DO HONDA CITY

Introduction

This tutorial provides a step-by-step guide on how to change the oil in your Honda City by yourself. With basic tools and a few handy tips, you can perform this maintenance task efficiently at home. Regular oil changes are crucial for maintaining your vehicle's performance and extending its lifespan.

Step 1: Gather Necessary Tools and Materials

Before starting, ensure you have all the required tools and materials:

• Engine oil (check your owner's manual for the correct type)
• Oil filter
• Oil filter wrench
• Socket wrench
• Oil catch pan
• Funnel
• Rags or paper towels
• Jack and jack stands (if needed)

Step 2: Prepare the Vehicle

1. Park Safely: Ensure your Honda City is parked on a flat surface and the engine is off.
2. Lift the Vehicle: If needed, use a jack to lift the front of the car and secure it with jack stands.
3. Remove Engine Cover: If your model has one, take off the engine cover for better accessibility.

Step 3: Drain the Old Oil

1. Locate Oil Drain Plug: Find the oil drain plug under the vehicle.
2. Place the Oil Catch Pan: Position the catch pan under the drain plug.
3. Remove the Drain Plug: Use a socket wrench to loosen and remove the drain plug. Allow the old oil to fully drain into the pan.
4. Replace the Drain Plug: Once drained, clean the drain plug and reattach it securely.

Step 4: Change the Oil Filter

1. Locate Oil Filter: Identify the oil filter (usually a cylindrical metal component).
2. Remove Old Oil Filter: Use an oil filter wrench to unscrew the oil filter. Be cautious as some old oil may still be in the filter.
3. Prepare New Oil Filter: Before installing the new filter, apply a small amount of fresh oil to the rubber gasket on the new filter.
4. Install New Oil Filter: Screw the new oil filter into place by hand until snug, then tighten slightly with the wrench.

Step 5: Add New Oil

1. Remove Oil Filler Cap: Locate and remove the oil filler cap on top of the engine.
2. Use a Funnel: Place a funnel in the opening to prevent spills.
3. Pour New Oil: Add the recommended amount of new engine oil (refer to your owner's manual for specifics).
4. Replace Oil Cap: Once done, securely replace the oil filler cap.

Step 6: Check Oil Level

1. Start the Engine: Run the engine for a few minutes to circulate the new oil.
2. Check for Leaks: Inspect under the vehicle for any leaks around the drain plug and oil filter.
3. Turn Off the Engine: Let the engine sit for a minute, then check the oil level using the dipstick. Add oil if necessary.

Conclusion

Changing the oil in your Honda City is a straightforward process that can save you money and help you understand your vehicle better. Remember to dispose of the old oil and filter properly at a recycling center. With these steps, you can maintain your vehicle’s performance effectively. For future maintenance, consider learning how to change other components such as air filters or tires. Happy driving!