Replacing the mirror on a chevy equinox

Introduction

This tutorial will guide you through the process of replacing the side mirror on a Chevy Equinox. Whether your mirror is damaged or malfunctioning, this step-by-step guide will help you perform the replacement efficiently.

Step 1: Gather Your Tools and Materials

Before you begin, ensure you have the following tools and parts ready:

• Replacement mirror (left or right, depending on your need)
  • Left mirror without camera: Link
  • Right mirror without camera: Link
  • General mirrors: Link
• Screwdriver (flathead and Phillips)
• Socket wrench set
• Trim removal tool (optional, but helpful)
• Safety gloves

Step 2: Prepare Your Vehicle

• Park your Chevy Equinox on a flat surface and turn off the engine.
• Disconnect the battery to prevent any electrical issues while you work.

Step 3: Remove the Door Panel

• Locate the screws securing the door panel. Common places for screws include:
  • Behind the door handle
  • At the bottom of the panel
• Use a screwdriver to remove these screws.
• Carefully use a trim removal tool to detach the panel from the door. Start at the bottom and work your way up to avoid breaking clips.

Step 4: Disconnect the Old Mirror

• Once the door panel is removed, locate the mirror assembly.
• Disconnect the wiring harness by gently pulling it apart. If your mirror has a camera, ensure you handle the connections carefully.
• Remove the screws or bolts securing the mirror to the door using a socket wrench.

Step 5: Install the New Mirror

• Position the new mirror onto the door where the old mirror was secured.
• Use the screws or bolts to attach the mirror securely.
• Reconnect the wiring harness. Ensure it clicks into place.

Step 6: Reattach the Door Panel

• Align the door panel back onto the door frame, ensuring all clips are set correctly.
• Replace the screws you removed earlier to secure the panel.
• Double-check that everything is aligned and secured properly.

Step 7: Reconnect the Battery and Test

• Reconnect the battery.
• Test the new mirror to ensure it operates correctly, adjusting it as needed.

Conclusion

Replacing the mirror on a Chevy Equinox can be done with minimal tools and a little patience. Remember to gather all necessary parts and tools before you start, and work carefully to avoid damaging the door panel. If you encounter any issues, consider consulting a professional for assistance. Happy repairing!