GSM Burglar Alarm Unboxing and Basic Setup

Introduction

This tutorial provides a step-by-step guide for unboxing and setting up a GSM burglar alarm system. Designed to help you navigate the often confusing instruction manual, this guide simplifies the process of installing and programming the alarm system, ensuring you're well-equipped to enhance your home security.

Step 1: Unbox the Alarm System

• Open the box and inspect the contents.
• Typical components include:
  • Main alarm unit
  • Wireless PIR sensors
  • Smoke detector
  • Magnetic catches
  • Power supply unit
  • Remote control
  • Various installation accessories (screws, pads, clips)

Step 2: Understand the Main Components

• Familiarize yourself with the alarm unit:
  • SIM card slot located at the back
  • Rechargeable battery for power outages
  • Clips for optional wired sensors
• Note the wireless PIR sensor and smoke detector features:
  • Both can send alerts via SMS when triggered.

Step 3: Initial Setup of the Alarm Unit

• Plug the alarm unit into a power source using the provided power cable.
• Open the front flap and enter the default code: 6666 followed by the hash key #.
• This will allow you to access the setup instructions.

Step 4: Set Date and Time

1. Enter 48 to access the date and time setting.
2. Input the year (e.g., 15 for 2015), month (e.g., 03 for March), day (e.g., 27), and time (e.g., 1228 for 12:28 PM).
3. Confirm by pressing the hash key #.
4. Exit by pressing the star key * and hash key #.

Step 5: Program the PIR Sensor

1. Access the programming mode by entering the code 6666 and pressing the hash key #.
2. Enter 23 to access detector coding.
3. For the PIR sensor on zone 5, enter 05 followed by the hash key #.
4. Test the sensor by waving your hand in front of it to confirm it sends a signal.
5. Repeat for programming additional sensors as needed.

Step 6: Program the Smoke Detector

1. In programming mode, enter 23 for detector coding.
2. For the smoke detector (zone 4), enter 04 followed by the hash key #.
3. Press the test button on the smoke detector to complete the programming.

Step 7: Program the Magnetic Catch

1. Access the programming mode with 6666.
2. Enter 23 for detector coding and zone 09.
3. Press the button on the magnetic catch to send a signal.
4. Confirm that the setup is complete.

Step 8: Program the Remote Control

1. Access programming mode by entering 6666.
2. Enter 21 for remote control coding.
3. Press any button on the remote to complete the setup.

Step 9: Configure Alerts

• To add phone numbers for alerts:
  • Enter 6666 followed by 51 and the phone number, ending with the hash key #.
• For SMS alerts, enter 49 or 50 followed by the number and confirm.

Step 10: Set User Password

1. Access the setup mode with 6666.
2. Enter 38 followed by your desired password (e.g., 1234).
3. Confirm with the hash key # and exit with star * and hash #.

Step 11: Test the Alarm System

• Activate the alarm using the remote or the keypad.
• Confirm that the alarm sounds and that alerts are sent to the registered phone numbers.

Conclusion

You have successfully unboxed and set up your GSM burglar alarm system. Remember to test each component regularly to ensure proper function. For further customization, explore additional features in the manual. Stay safe, and enjoy the peace of mind that comes with a well-installed security system!