Honda Accord Ignition Switch/Lock Cylinder Replacement

Introduction

This tutorial provides a step-by-step guide for replacing the ignition switch and lock cylinder in a Honda Accord. This is an advanced task that may take approximately 1.5 hours to complete. If you're not confident in performing this repair, consider seeking assistance from a professional mechanic.

Step 1: Gather Your Tools

Before starting the replacement, ensure you have the following tools on hand:

• Phillips screwdriver
• 90° pick
• 12 mm socket
• 10 mm socket
• 8 mm socket
• Extension
• Ratchet
• Hammer
• Punch
• Drill motor
• 1/4" drill bit

Step 2: Prepare the Vehicle

• Park the Honda Accord on a flat surface and engage the parking brake.
• Disconnect the negative battery terminal to prevent any electrical issues while working on the ignition system.

Step 3: Remove the Steering Column Covers

• Use the Phillips screwdriver to remove the screws securing the lower steering column cover.
• Gently pull apart the covers to expose the ignition lock cylinder.

Step 4: Access the Ignition Lock Cylinder

• Locate the ignition lock cylinder on the steering column.
• Use the 90° pick to press the release tab on the lock cylinder.
• Turn the key to the "On" position to aid the removal process.

Step 5: Remove the Ignition Lock Cylinder

• While pressing the release tab, pull the ignition lock cylinder out of the steering column.
• If it does not come out easily, gently tap it with a hammer to free it.

Step 6: Install the New Ignition Lock Cylinder

• Align the new ignition lock cylinder with the steering column.
• Push it in until it clicks into place.

Step 7: Reassemble the Steering Column

• Reattach the steering column covers and secure them with screws.
• Ensure that everything is aligned properly and that there are no loose parts.

Step 8: Reconnect the Battery

• Reconnect the negative battery terminal.
• Turn the key in the ignition to test the new lock cylinder, ensuring that it operates smoothly.

Conclusion

Replacing the ignition switch and lock cylinder in your Honda Accord can be a challenging but rewarding task. Remember to take your time and follow each step carefully. If you encounter any difficulties, don't hesitate to consult a professional mechanic. After completing the replacement, ensure to test the ignition to confirm proper functionality.