How to deep clean your paint the *right* way: wash & decontaminate before polish/ceramic coating

Introduction

This tutorial will guide you through the process of deep cleaning your vehicle, specifically a Jeep, to prepare it for polishing and ceramic coating. By following these steps, you will effectively wash and decontaminate your vehicle, ensuring it is ready for the next stages of detailing.

Step 1: Gather Your Supplies

Before starting the cleaning process, collect the necessary products and tools. Here’s what you will need:

• All Clean
• Wheel and Body Brush
• Incredible Suds
• Decon Towel (Fine Grade Clay Towel)
• Iron Remover
• Water Spot Remover
• Drying Blanket
• Plush Buffing Towel

You can find these products through the provided links in the video description.

Step 2: Initial Rinse

Begin by rinsing your Jeep to remove loose dirt and debris.

• Use a pressure washer or a hose with a spray nozzle.
• Focus on the wheels, wheel wells, and undercarriage to eliminate grime.
• Make sure to rinse all areas, including nooks and crannies, to ensure a thorough initial clean.

Step 3: Apply a Foam Wash

Next, apply a foam wash to your vehicle for a deeper clean.

• Mix Incredible Suds with water according to the product instructions.
• Use a foam cannon or a bucket to apply the foam generously across the entire surface.
• Allow the foam to sit for a few minutes to break down any remaining dirt.

Step 4: Scrub the Surface

After letting the foam sit, it’s time to scrub your Jeep.

• Use the Wheel and Body Brush to agitate the foam.
• Work in sections, starting from the top and moving downwards to avoid dirtying areas already cleaned.
• Rinse off the foam and dirt as you go to prevent it from drying on the surface.

Step 5: Decontaminate the Paint

Once the vehicle is clean, it’s time to remove any embedded contaminants.

• Spray Iron Remover onto the paint and allow it to dwell for a few minutes.
• Use the Decon Towel to gently rub the surface, removing any clayable contamination.
• Rinse thoroughly with water to wash away any residue.

Step 6: Remove Water Spots

To ensure a flawless finish, treat any water spots on the paint.

• Apply Water Spot Remover according to the product instructions.
• Wipe the area gently with a clean cloth or towel.
• Rinse again to remove any leftover solution.

Step 7: Dry the Vehicle

Properly drying your Jeep is crucial before moving to the polishing or coating stage.

• Use a Drying Blanket to absorb moisture effectively.
• Start from the top and work your way down, ensuring all areas are dried completely.
• Pay special attention to crevices where water may collect.

Step 8: Final Inspection

Before moving on to polishing or ceramic coating, inspect the surface.

• Look for any missed spots or contaminants.
• Ensure the vehicle is completely dry and free of debris.
• If necessary, repeat any cleaning steps to achieve a pristine finish.

Conclusion

By following these steps, you have successfully deep cleaned your Jeep in preparation for polishing and ceramic coating. Remember to maintain your vehicle regularly to keep it looking its best. Your next steps could involve applying a polish or a ceramic coating for added protection and shine. Happy detailing!