Rakit PC Pribadi Part 2: WAKTUNYA NGERAKIT SEMUANYA!

Introduction

This tutorial provides a step-by-step guide for assembling a personal computer using the components discussed in the YouTube video "Rakit PC Pribadi Part 2" by GadgetIn. Whether you are a beginner or have some experience, this guide will help you understand the assembly process, ensuring a successful build with practical tips and common pitfalls to avoid.

Step 1: Gather Your Components

Before starting the assembly, ensure you have all the necessary parts:

• AMD Ryzen 7 3700X
• MSI B550-A Pro motherboard
• KLEVV DDR4 2x8GB RAM
• WD SSD Black NVME M.2 500GB
• Samsung SSD 860 EVO 1TB
• Noctua NH-U12S CH.BK Chromax Black CPU cooler
• LIAN LI O11 Dynamic Mini - White case
• Cooler Master V750 SFX 80+ Gold power supply
• Gigabyte VGA RTX 3070 Gaming OC 8GB graphics card
• Be Quiet! Silent Wings 3 fans

Practical Tip: Check if all components are compatible with each other before purchasing.

Step 2: Prepare Your Workspace

Set up a clean, static-free environment for your build:

• Use an anti-static wrist strap to prevent damaging components.
• Clear a large, flat surface to work on.
• Organize your tools (screwdriver, pliers, etc.) within reach.

Common Pitfall: Avoid working on carpet or other static-prone surfaces.

Step 3: Install the CPU

1. Open the CPU socket on the MSI B550-A Pro motherboard.
2. Carefully place the AMD Ryzen 7 3700X into the socket, aligning the notches.
3. Secure the CPU by closing the socket lever.

Practical Tip: Ensure you don’t touch the pins on the CPU to avoid damage.

Step 4: Apply Thermal Paste and Install the CPU Cooler

1. Apply a small dot of thermal paste on the CPU.
2. Attach the Noctua NH-U12S cooler on top of the CPU, securing it with screws.
3. Connect the cooler’s power cable to the motherboard.

Common Pitfall: Use too much thermal paste; a small dot is sufficient.

Step 5: Install RAM

1. Locate the RAM slots on the motherboard.
2. Open the clips on the slots.
3. Insert the KLEVV DDR4 RAM sticks into the slots, ensuring they click into place.

Practical Tip: Install RAM in the recommended slots for dual-channel configuration.

Step 6: Install the SSDs

1. For the WD SSD NVME, locate the M.2 slot on the motherboard.
2. Insert the SSD at an angle and secure it with a screw.
3. For the Samsung SSD 860 EVO, mount it in a 2.5-inch drive bay using screws.

Common Pitfall: Double-check connections to avoid loose components.

Step 7: Prepare the Case

1. Open the LIAN LI O11 Dynamic Mini case.
2. Install the power supply (Cooler Master V750 SFX) at the designated location.
3. Organize cables to ensure optimal airflow.

Practical Tip: Manage cables efficiently to improve airflow and aesthetics.

Step 8: Install the Motherboard

1. Place the motherboard into the case, aligning it with the standoffs.
2. Secure it with screws.
3. Connect all necessary power cables from the power supply to the motherboard.

Step 9: Install the Graphics Card

1. Locate the PCIe slot for the Gigabyte VGA RTX 3070.
2. Insert the graphics card into the slot until it clicks.
3. Secure it with screws and connect any required power cables.

Practical Tip: Ensure the card is fully seated in the PCIe slot.

Step 10: Install Fans

1. Position the Be Quiet! Silent Wings 3 fans in desired locations for optimal cooling.
2. Connect the fan cables to the motherboard.

Common Pitfall: Ensure airflow direction is correct; typically, fans should draw air in from the front and exhaust out the back.

Conclusion

Building your own PC can be a rewarding experience that allows for customization and upgrades. Ensure you follow each step carefully, check compatibility, and manage your workspace to avoid common pitfalls. Once assembled, you can proceed to install an operating system and drivers to get your new PC up and running. Enjoy your new setup!