Как исправить ошибку (Код 45/Код 10) с устройством Wi-Fi

3 min read 14 days ago
Published on Jan 26, 2025 This response is partially generated with the help of AI. It may contain inaccuracies.

Table of Contents

Introduction

This tutorial provides a step-by-step guide on how to fix two common errors related to MediaTek Wi-Fi adapters on Windows: Code 45 (the device is not connected to the computer) and Code 10 (the device cannot start). By following these instructions, you can troubleshoot and resolve these issues effectively.

Step 1: Check Device Connection

  1. Physically inspect the device:

    • Ensure that your Wi-Fi adapter is properly connected to your computer. If it is a USB adapter, try unplugging it and plugging it back in.
    • If it's an internal adapter, ensure that it is securely seated in its slot.
  2. Reboot your computer:

    • Sometimes a simple restart can resolve connectivity issues.

Step 2: Update Device Drivers

  1. Open Device Manager:

    • Right-click on the Start button and select Device Manager.
  2. Locate the Wi-Fi adapter:

    • Expand the "Network adapters" section to find your MediaTek Wi-Fi adapter.
  3. Update the driver:

    • Right-click on the adapter and select "Update driver."
    • Choose "Search automatically for updated driver software" and follow the prompts.
  4. Reboot your computer:

    • Restart your computer again after updating the driver.

Step 3: Reset Network Settings

  1. Open Command Prompt as an Administrator:

    • Type "cmd" in the search bar, right-click on Command Prompt, and select "Run as administrator."
  2. Run the following commands:

    • This will reset various network settings:
      netsh winsock reset
      netsh int ip reset
      ipconfig /release
      ipconfig /renew
      ipconfig /flushdns
      
    • Enter each command one at a time and press Enter.
  3. Reboot your computer:

    • Restart your computer to apply the changes.

Step 4: Check for Windows Updates

  1. Open Settings:

    • Click on the Start menu and select Settings (the gear icon).
  2. Go to Update & Security:

    • Click on "Windows Update" and check for updates.
  3. Install any available updates:

    • If updates are found, install them and restart your computer.

Step 5: Remove and Reinstall the Device

  1. Return to Device Manager:

    • In Device Manager, right-click on the MediaTek Wi-Fi adapter.
  2. Uninstall the device:

    • Select "Uninstall device," then confirm any prompts.
  3. Reboot your computer:

    • Restart your computer; Windows should automatically reinstall the drivers for the Wi-Fi adapter.

Conclusion

By following these steps, you should be able to resolve the Code 45 and Code 10 errors associated with your MediaTek Wi-Fi adapter. If the problem persists, consider contacting technical support or seeking professional assistance. Regularly updating your drivers and the Windows operating system can help prevent these issues in the future.