Замена экрана на Realme 9 Pro Plus

Introduction

This tutorial provides a comprehensive guide on how to replace the display module for the Realme 9 Pro Plus. Whether your screen is cracked or malfunctioning, this step-by-step instruction will help you perform the replacement safely and effectively. Remember, all actions are at your own risk, and it's recommended to proceed with caution.

Step 1: Gather Your Tools and Materials

Before starting the replacement, ensure you have everything you need:

• A new display module for Realme 9 Pro Plus
• A set of small screwdrivers
• A plastic opening tool
• Tweezers
• A heat gun or hairdryer
• Adhesive (if the new display does not come with it)
• Protective eyewear and gloves

Step 2: Power Off Your Device

• Make sure to turn off your Realme 9 Pro Plus to avoid any electrical shorts or damage during the repair process.

Step 3: Remove the Back Cover

1. Use the heat gun or hairdryer to gently heat the edges of the back cover. This softens the adhesive, making it easier to remove.
2. Carefully insert the plastic opening tool between the back cover and the phone body.
3. Slowly work your way around the edges to detach the back cover without damaging it.

Step 4: Disconnect the Battery

1. Locate the battery connector on the motherboard.
2. Use a plastic tool or your fingers to carefully disconnect the battery. This step is crucial to ensure safety during the replacement.

Step 5: Remove the Old Display

1. Heat the front of the phone slightly (do not overheat) to loosen the adhesive.
2. Using the plastic opening tool, begin lifting the display from one edge.
3. Work your way around the display, ensuring you do not damage any components underneath.

Step 6: Install the New Display

1. Align the new display module with the phone body.
2. Once aligned, press it down gently, ensuring that it fits securely.
3. Reconnect any cables that were disconnected during the removal process.

Step 7: Reconnect the Battery

• Once the new display is securely in place, reconnect the battery to the motherboard.

Step 8: Reattach the Back Cover

• Apply adhesive if necessary, then align and press the back cover back onto the phone, ensuring it seals properly.

Step 9: Power On Your Device

• Turn on your Realme 9 Pro Plus to test the new display for functionality. Check for touch responsiveness and display clarity.

Conclusion

You have successfully replaced the display on your Realme 9 Pro Plus! Ensure all components are functioning correctly. If you encounter any issues, consider seeking professional assistance. For future repairs, remember to keep your tools organized and proceed with care. If you need a new display, check the recommended link for purchasing options and use the provided discount code for savings.