Ford Fusion P144c Engine Code "AKA" Purge Value Replacement. Thez Nutz Garage Episode #35

Introduction

In this tutorial, we will guide you through the process of replacing the purge valve on a 2014 Ford Fusion with a 2.0 Ecoboost engine. This procedure is particularly relevant if your vehicle is displaying a P144c engine code, indicating an issue with the purge valve. By following these steps, you can save on repair costs and ensure your car runs smoothly.

Step 1: Gather Necessary Tools and Parts

Before starting the replacement, ensure you have the following tools and parts ready:

• New purge valve (approximately $55.00 from eBay or local auto parts stores)
• Socket wrench set
• Screwdrivers (flathead and Phillips)
• Pliers
• Gloves (to protect your hands)
• Safety goggles (recommended)

Step 2: Locate the Purge Valve

To access the purge valve:

1. Open the hood of your Ford Fusion.
2. Locate the engine cover, if equipped, and remove it by unscrewing any fasteners.
3. Identify the purge valve. It's usually found near the intake manifold, connected to several hoses.

Step 3: Disconnect the Purge Valve

Carefully disconnect the old purge valve:

1. Remove the electrical connector:
   • Gently press the tab on the connector and pull it away from the purge valve.
2. Detach the hoses:
   • Use pliers to loosen any clamps or simply pull off the hoses if they are not secured with clamps.
   • Be cautious to avoid damaging the hoses.

Step 4: Install the New Purge Valve

Now, install the new purge valve:

1. Position the new valve:
   • Align it with the hose connections and electrical connector.
2. Reconnect the hoses:
   • Slide the hoses onto the new valve and secure them with clamps if applicable.
3. Reconnect the electrical connector:
   • Ensure it clicks into place securely.

Step 5: Reassemble and Test

After installation, reassemble any components you removed:

1. Replace the engine cover if applicable.
2. Close the hood securely.

To test the new purge valve:

1. Start the engine and allow it to idle for a few minutes.
2. Check for any engine codes using an OBD-II scanner.
3. Take the vehicle for a short drive to ensure it runs smoothly.

Conclusion

Replacing the purge valve on your Ford Fusion is a manageable task that can save you money on repairs. By following these steps, you should be able to resolve the P144c engine code and enjoy a well-functioning vehicle. If you encounter any issues or have questions, consider consulting a professional mechanic or checking online forums for additional support. Happy driving!