Reviving 3D Printing Filament with the EIBOS Polyphemus - Dryer Testing, Review, and GIVEAWAY!

How to Properly Dry and Test 3D Printing Filament with the EIBOS Polyphemus Filament Dryer

1. Introduction to Filament Drying:

   • Understand the importance of drying filament, especially for materials like TPU and PVA that are prone to absorbing moisture.
   • Filaments like PLA and ABS can also benefit from drying if they have been exposed to the air for a while.

2. Unboxing and Setup:

   • Assemble the EIBOS Polyphemus Filament Dryer following the provided instructions.
   • The setup process is straightforward and should take around 5 minutes.

3. Operating the Filament Dryer:

   • Place your filament spool inside the dryer and close the cover.
   • The machine has preset options for different filament types, making it easy to set the correct temperature and time.
   • Keep the rotation function on for even drying.

4. Testing with PLA Filament:

   • Print a test model with undried PLA filament to establish a baseline.
   • Dry the same PLA filament in the EIBOS Polyphemus for 4 hours.
   • Compare the quality of prints before and after drying to observe any improvements in surface texture and overall print quality.

5. Testing with Problematic Filament:

   • Use a filament brand that has consistently given rough prints even with proper settings.
   • Dry the filament in the Polyphemus and print the same model again to see if there is a noticeable difference in print quality.

6. Testing with TPU Filament:

   • TPU filament is highly sensitive to moisture, leading to issues like stringing and poor print quality.
   • Dry TPU filament in the Polyphemus for 4 hours and compare the prints before and after to evaluate the impact of drying on print quality.

7. Observations and Analysis:

   • Examine the surface roughness, stringing, and overall print quality of the dried filament compared to the undried filament.
   • Look for improvements in surface texture, stringing reduction, and overall print consistency.

8. Review of the EIBOS Polyphemus Filament Dryer:

   • Discuss the performance, design, and features of the Polyphemus Filament Dryer.
   • Highlight the benefits of using a filament dryer for different types of filaments, especially moisture-sensitive materials like TPU and PVA.

9. Conclusion and Giveaway:

   • Summarize the results of the testing and review of the Polyphemus Filament Dryer.
   • Encourage viewers to participate in the giveaway for a chance to win a Polyphemus Filament Dryer for their workshop.

10. Final Thoughts:

• Emphasize the importance of filament drying for maintaining print quality.
• Recommend the EIBOS Polyphemus Filament Dryer as a reliable option for improving print outcomes, especially for moisture-prone filaments.

By following these steps, you can effectively dry and test your 3D printing filament using the EIBOS Polyphemus Filament Dryer to achieve better print results.