101: Adding a Uniview IPC via EZDDNS on a Uniview NVR

Introduction

This tutorial will guide you through the process of adding a Uniview IP camera to a remote Uniview NVR using the EZDDNS service. This method is useful for connecting cameras located in different networks and is relevant for both home and business surveillance systems.

Step 1: Access the Remote NVR

• Ensure you have the IP address of the remote NVR.
• Open a web browser and enter the IP address of the remote NVR to access its interface.
• Log in using your administrator credentials.

Step 2: Locate the Camera Configuration Section

• Once logged in, navigate to the camera management section. This may be labeled as “Camera,” “IPC,” or “Device Management” depending on your NVR model.
• Look for an option to add or configure a new camera.

Step 3: Set Up the EZDDNS Service

• Find the EZDDNS settings in the NVR’s network configuration menu.
• Enable the EZDDNS service if it is not already activated.

Input the necessary information

• Domain Name: Create a unique domain name for your camera.
• Username and Password: Use the credentials you set up for the EZDDNS account.

Step 4: Add the Uniview IPC

• Go back to the camera management section.
• Select the option to add a new camera.

Input the camera details

• Camera Type: Choose Uniview or the appropriate model from the list.
• Camera IP Address: Use the EZDDNS domain name you created earlier.
• Port: Enter the port number used by the camera (default is usually 80 or 8000).
• Username and Password: Enter the camera's login credentials.

Step 5: Configure Camera Settings

• After adding the camera, navigate to its settings page.
• Adjust settings such as resolution, frame rate, and streaming quality according to your needs.
• Test the camera feed to ensure it is functioning correctly.

Step 6: Save and Reboot

• Save all configurations made to the NVR and the camera settings.
• Reboot the NVR to ensure all changes take effect properly.

Conclusion

In this tutorial, you learned how to add a Uniview IPC to a remote Uniview NVR using the EZDDNS service. By following these steps, you can easily manage and monitor cameras across different networks. For further enhancement, consider exploring additional features offered by your NVR, such as motion detection and alert settings to optimize your surveillance system.