INSTALLING RIPP SUPERCHARGER KIT [P.1] DODGE CHALLENGER SXT (V6)

Introduction

In this tutorial, we will guide you through the process of installing the RIPP supercharger kit on a Dodge Challenger SXT with a V6 engine. This modification can significantly enhance your vehicle's performance, giving it the power boost you desire. Whether you're a seasoned car enthusiast or a beginner, this step-by-step guide will help you navigate the installation process with ease.

Step 1: Gather Necessary Tools and Materials

Before starting the installation, ensure you have all the required tools and materials on hand:

• RIPP supercharger kit
• Socket set (including deep sockets)
• Wrenches
• Screwdrivers (flathead and Phillips)
• Torque wrench
• Pliers
• Vacuum cleaner or compressed air
• Clean rags
• Safety glasses and gloves

Tip: Organize your workspace to keep tools accessible and avoid losing any small parts during the installation.

Step 2: Prepare the Vehicle

1. Park your Dodge Challenger on a flat surface and engage the parking brake.
2. Disconnect the battery by removing the negative terminal to prevent any electrical issues during installation.
3. Remove the engine cover to access the engine components. This may involve unscrewing several bolts.

Common Pitfall: Always ensure the engine is cool before starting work to avoid burns.

Step 3: Remove Stock Components

1. Remove the air intake system:

   • Detach the air filter and intake tubing.
   • Unscrew any mounting brackets holding the intake in place.

2. Disconnect the fuel injectors:

   • Carefully unplug the electrical connectors from the fuel injectors.
   • Remove the fuel rail by unscrewing the retaining bolts.

3. Remove the stock throttle body:

   • Disconnect the throttle body cable and electrical connector.
   • Unscrew the throttle body from the intake manifold.

Tip: Keep track of all screws and components; using labeled containers can help.

Step 4: Install the RIPP Supercharger Kit

1. Follow the manufacturer’s instructions included with the supercharger kit for specific installation steps.

2. Install the new throttle body adapter as per the instructions.

3. Secure the supercharger unit onto the intake manifold:

   • Align the supercharger with the mounting holes.
   • Use a torque wrench to tighten the bolts to the specified torque settings.

4. Connect the supplied hoses and fittings according to the diagram provided in the kit.

Step 5: Reconnect Fuel Lines and Electrical Components

1. Reattach the fuel rail and ensure the fuel injectors are properly seated.
2. Reconnect the throttle body and its cable.
3. Plug in all electrical connectors that were disconnected earlier.

Tip: Double-check connections to avoid leaks or electrical issues.

Step 6: Install New Air Intake System

1. Install the new air filter and intake tubing that comes with the supercharger kit.
2. Ensure all clamps and connections are secure.

Step 7: Final Checks and Reconnect Battery

1. Go through all connections and ensure everything is properly installed.
2. Reconnect the battery by attaching the negative terminal.
3. Start the engine and check for any unusual sounds or leaks.

Common Pitfall: If the engine doesn’t start or runs poorly, recheck all connections and components.

Conclusion

Congratulations on successfully installing the RIPP supercharger kit on your Dodge Challenger SXT! This modification can greatly enhance your vehicle's performance. Remember to take your time during the installation and ensure all components are secure. For continued enhancement, consider tuning your engine to maximize the benefits of the supercharger. Happy driving!