Printers Operation Could Not be Completed Error 0×00000709 | Error 0x00000709 | Printers

Introduction

This tutorial guides you through resolving the "Operation Could Not Be Completed Error 0×00000709" that may occur when using printers on Windows. This error can prevent you from successfully adding or sharing printers on your device. By following these steps, you can troubleshoot the issue effectively and get your printer back to working order.

Step 1: Restart Your Devices

Sometimes, a simple restart can resolve many printer issues, including error 0×00000709.

1. Power off your printer.
2. Shut down your computer completely.
3. Wait for a few minutes before turning them back on.
4. Check if the error persists.

Step 2: Check Printer Name

An incorrect printer name can trigger the error. Ensure that the printer name is accurate.

1. Open Control Panel on your computer.
2. Navigate to Devices and Printers.
3. Locate your printer and verify its name.
4. If necessary, rename the printer to remove any special characters or spaces.

Step 3: Modify Printer Settings

Adjusting certain settings may help resolve the issue.

1. Right-click on your printer in Devices and Printers.
2. Select Printer Properties.
3. In the Ports tab, ensure the correct port is selected.
4. Go to the Sharing tab and ensure that printer sharing is enabled, if applicable.

Step 4: Use Command Prompt to Re-register Apps

If the problem persists, you can re-register Windows apps using Command Prompt.

1. Press Windows Key + X and select Windows Terminal (Admin).

2. Enter the following command:

   Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}
   

3. Press Enter to run the command.

4. Restart your computer and check the printer functionality.

Step 5: Update Printer Drivers

Outdated or corrupt printer drivers can lead to various errors.

1. Open Device Manager by right-clicking on the Start button and selecting it.
2. Locate Printers and expand the section.
3. Right-click on your printer and select Update driver.
4. Choose the option to search automatically for updated driver software.
5. Follow the prompts to complete the update.

Step 6: Remove and Re-add the Printer

If none of the above steps work, try removing and re-adding the printer.

1. Go to Devices and Printers in the Control Panel.
2. Right-click on your printer and select Remove device.
3. Click on Add a printer to reinstall it.
4. Follow the on-screen instructions to complete the setup.

Conclusion

By following these steps, you should be able to resolve the "Operation Could Not Be Completed Error 0×00000709" and restore your printer's functionality. If the issue persists after trying all the steps, consider checking for any Windows updates or consulting your printer's manufacturer support.