Geely coolray замена задних тормозных колодок пробег на колодках 40 000 км

Introduction

This tutorial provides a step-by-step guide on replacing the rear brake pads for the Geely Coolray after a usage of approximately 40,000 kilometers. Regular maintenance of brake pads is crucial for ensuring safety and optimal vehicle performance. This guide will help you understand the process involved in this replacement, including necessary tools and tips to avoid common mistakes.

Step 1: Gather Necessary Tools and Materials

Before starting the replacement, ensure you have the following tools and materials on hand:

• New brake pads
• Socket wrench set
• Torque wrench
• Brake cleaner
• C-clamp or brake caliper tool
• Screwdriver (flathead and Phillips)
• Jack and jack stands

Step 2: Prepare the Vehicle

1. Park on a Level Surface: Ensure the vehicle is on a flat surface to avoid any rolling.
2. Engage the Handbrake: Always engage the handbrake to prevent the vehicle from moving.
3. Loosen Wheel Nuts: Using a socket wrench, slightly loosen the wheel nuts before lifting the vehicle.

Step 3: Lift the Vehicle

1. Use the Jack: Position the jack under the vehicle's specified jacking point.
2. Raise the Vehicle: Lift the vehicle high enough to access the rear wheels.
3. Secure with Jack Stands: Place jack stands under the vehicle for safety.

Step 4: Remove the Wheel

1. Remove Wheel Nuts: Completely unscrew and remove the loosened wheel nuts.
2. Take Off the Wheel: Carefully take off the wheel and set it aside in a safe location.

Step 5: Access the Brake Caliper

1. Locate the Brake Caliper: Identify the brake caliper, which houses the brake pads.
2. Remove Caliper Bolts: Use a socket wrench to remove the bolts holding the caliper in place.
3. Gently Slide Off the Caliper: Carefully slide the caliper off the rotor. Support it to avoid strain on the brake line.

Step 6: Replace the Brake Pads

1. Remove Old Brake Pads: Take out the old brake pads from the caliper bracket.
2. Clean the Area: Use brake cleaner to clean the caliper and bracket.
3. Insert New Brake Pads: Position the new brake pads into the caliper bracket.

Step 7: Reinstall the Brake Caliper

1. Compress the Caliper: Use a C-clamp or brake caliper tool to compress the caliper piston.
2. Reattach the Caliper: Carefully slide the caliper back over the new pads and rotor.
3. Secure with Bolts: Tighten the caliper bolts securely using a torque wrench, following manufacturer specifications.

Step 8: Reattach the Wheel

1. Place the Wheel Back: Align the wheel with the hub and place it back onto the vehicle.
2. Hand-Tighten Wheel Nuts: Screw the wheel nuts by hand to secure the wheel temporarily.

Step 9: Lower the Vehicle

1. Remove Jack Stands: Before lowering, ensure all tools are out from under the vehicle.
2. Lower the Vehicle: Carefully lower the vehicle back to the ground using the jack.

Step 10: Finalize the Wheel Installation

1. Tighten Wheel Nuts: Once on the ground, use a torque wrench to tighten the wheel nuts to the specified torque.
2. Repeat for Other Side: If needed, repeat the process on the other side for symmetry.

Conclusion

Replacing the rear brake pads on your Geely Coolray is a manageable task that can enhance your vehicle's safety and performance. Regularly check your brake pads for wear and perform replacements as needed. Always consult your vehicle's manual for specific torque settings and guidelines. If you're unsure or uncomfortable with any step, consider seeking professional assistance.