AUTOFLUID 10 - AUTOSAN: under slab piping

Introduction

This tutorial will guide you through the process of configuring, designing, and dressing under slab piping networks using the AUTOSAN routing command, as demonstrated in the AUTOFLUID video. This step-by-step guide is essential for anyone looking to effectively manage under-slab piping in construction or renovation projects.

Step 1: Accessing the AUTOSAN Tool

• Open the AUTOSAN software on your device.
• Navigate to the specific project where you want to set up the under slab piping.
• Ensure that all necessary design parameters are configured for your project.

Step 2: Initiating the Routing Command

• Locate the routing command feature within AUTOSAN.
• Select the ‘Create New Route’ option.
• Input the starting point and endpoint for your piping network.
• Ensure that you have selected the appropriate pipe types for your project specifications.

Step 3: Configuring the Piping Network

Adjust the parameters for each section of the pipe

• Set the diameter based on the flow requirements.
• Specify the material type (e.g., PVC, copper).
• Use the software’s built-in tools to visualize the piping layout.
• Make sure to account for any obstacles or structural elements in your design.

Step 4: Dressing the Piping

• Select the dressing tools available in AUTOSAN.
• Apply insulation if required for thermal management.
• Use the dressing command to ensure the pipes are placed correctly beneath the slab.
• Check for proper spacing between pipes to prevent clashing and ensure maintenance access.

Step 5: Finalizing the Design

• Review your piping layout for any potential issues.
• Use the ‘Simulation’ feature to analyze the flow dynamics within your piping network.
• Make adjustments as necessary based on the simulation results.
• Save your design regularly to prevent data loss.

Step 6: Exporting the Design

• Once satisfied, export your design to the desired format.
• Ensure compatibility with other software or stakeholders who will use the design.
• Consider generating a report that includes all specifications and drawings for future reference.

Conclusion

In this tutorial, you learned how to effectively configure and design under slab piping networks using the AUTOSAN routing command. By following these steps, you can ensure a well-structured piping system that meets your project needs. For further information and advanced features, consider visiting the AUTOFLUID website or exploring additional resources provided in the video.