Tfal Optigrill Recalibration GC702 Model

Introduction

This tutorial provides a step-by-step guide for recalibrating the T-fal Optigrill model GC702. If your grill is not functioning correctly, this process can help restore its performance. You will need a spacer, which can be an oven mitt, hot pad, rolled aluminum foil, or a wooden spoon, measuring between 1-1/2 inches and 2 inches in height.

Step 1: Prepare the Grill

• Plug the T-fal Optigrill into a power source.
• Make sure you have your spacer ready for the recalibration process.

Step 2: Initiate the Recalibration Mode

• Press and hold the following buttons simultaneously for 3 seconds:
  • Burger
  • Fish
  • Manual
• Release all buttons.
• Observe the Steak button; it will flash three times.

Step 3: Position the Spacer

• Wait until the Steak button lights up solidly.
• Open the grill lid and place the spacer between the grill plates.
• Close the lid to secure the spacer.

Step 4: Complete the Calibration Process

• Press the Steak button once. The button will flash three more times.
• Open the grill and carefully remove the spacer.
• Close the lid.

Step 5: Finalize the Recalibration

• Unplug the grill for 10 seconds.
• Plug the grill back in. It should now operate correctly.

Additional Instructions for Models GC704 and GC712

If you have an Optigrill with Ceramic Plates or the OptiGrill Plus, follow these steps:

Step 1: Enter Calibration Mode

• Press and hold the following buttons simultaneously until the unit beeps and shows a blue light:
  • Burger
  • Poultry
  • Manual
• Open the grill lid.

Step 2: Insert the Spacer

• If the unit light turns red, open the grill, insert the spacer, and close the lid until the light turns off.
• If the light turns off immediately, follow these additional steps:
  • Insert the spacer and close the lid.
  • After 3 seconds, the unit light will turn green and beep.

Step 3: Finalize the Process

• Open the lid; the light will turn red and beep.
• Remove the spacer and close the lid.
• Press the power button three times, noting the light changes from Yellow to Orange to Red.
• Unplug the unit for 10 seconds.
• Plug the grill back in to complete the reset.

Conclusion

Recalibrating your T-fal Optigrill GC702 is a straightforward process that can enhance its performance. Follow the steps closely, ensuring you use the correct spacer, and your grill should be back in working order. If you encounter issues, refer to the additional instructions for models GC704 and GC712. Happy grilling!