PS5 thumbstick replacement | Quick tutorial

Introduction

This tutorial will guide you through the process of replacing the thumbsticks on your PlayStation 5 controller. If your thumbsticks are worn out, crusty, or peeling, this step-by-step guide will help you get your controller back in top shape for optimal gaming performance.

Step 1: Gather Your Materials

Before you start, make sure you have all the necessary tools and replacement parts.

• Replacement thumbsticks (available at extremeRate)
• Small Phillips screwdriver
• Plastic pry tool or flathead screwdriver
• A clean workspace

Practical Tips

• Choose a well-lit area to work in.
• Avoid using excessive force to prevent damaging your controller.

Step 2: Open the Controller

To replace the thumbsticks, you need to open the PS5 controller.

1. Remove the screws:

   • Use the small Phillips screwdriver to remove the screws on the back of the controller.
   • Keep the screws in a safe place to avoid losing them.

2. Pry open the controller:

   • Use the plastic pry tool to gently separate the front and back halves of the controller.
   • Start at one edge and work your way around to avoid breaking any clips.

Step 3: Remove the Old Thumbsticks

Now that the controller is open, you can access the thumbsticks.

1. Locate the thumbsticks:

   • Identify the areas where the thumbsticks are attached to the circuit board.

2. Detach the thumbsticks:

   • Carefully pull the old thumbsticks off the metal posts.
   • If they are stuck, try twisting them gently to loosen them.

Common Pitfalls

• Be careful not to damage the circuit board while removing the thumbsticks.

Step 4: Install the New Thumbsticks

With the old thumbsticks removed, you can now install the new ones.

1. Align the new thumbsticks:

   • Position the new thumbsticks over the metal posts.

2. Press down firmly:

   • Gently press down until the new thumbsticks snap into place.

Step 5: Reassemble the Controller

Once the new thumbsticks are in place, it's time to put your controller back together.

1. Align the halves:

   • Carefully align the front and back halves of the controller.

2. Secure the screws:

   • Reinsert the screws you removed in Step 1 and tighten them without overdoing it.

Conclusion

You've successfully replaced the thumbsticks on your PS5 controller! Take a moment to test them out before diving back into your gaming sessions. If you encounter any issues, double-check that everything is securely in place. For further enhancements, consider exploring other customization options available at extremeRate. Happy gaming!