FIXA ROST PÅ BILEN MED GRYMT RESULTAT! MÅLAR MED SPRAYBURK

Introduction

In this tutorial, you'll learn how to effectively repair rust on your car using spray paint, achieving professional-looking results without breaking the bank. This guide will walk you through each step of the process, from preparation to finishing touches, ensuring a smooth and successful rust repair.

Step 1: Gather Your Materials

Before starting the repair, make sure you have all the necessary materials on hand:

• Primer paint
• Plastic padding filler
• Rubber spatula
• Car color paint (mixed according to your color code)
• Two-component clear coat (2K)
• Silicone remover
• Sandpaper (grit 240 and 400)
• Wet sandpaper (grit 2000, 3000, and optionally 4000)
• Masking tape
• Protective plastic cover
• Polishing machine (rotary or oscillating)
• Coarse polishing pad
• Rubbing compound
• Cleaning cloth
• Respirator mask

Step 2: Prepare the Rust Area

• Clean the Surface: Use a silicone remover to clean the rusted area thoroughly. This ensures that no contaminants interfere with the repair.
• Sand the Rust: Use sandpaper (grit 240) to sand down the rusted area. Remove all rust until you reach bare metal. For a smoother finish, follow up with 400-grit sandpaper.
• Mask the Surrounding Area: Apply masking tape and protective plastic around the repair area to protect unaffected paint from overspray.

Step 3: Apply Filler

• Mix the Filler: Prepare the plastic padding filler according to the manufacturer's instructions.
• Fill the Rust Spot: Use a rubber spatula to apply the filler to the rusted area. Smooth it out so it’s level with the surrounding surface.
• Let it Cure: Allow the filler to cure completely as per the product guidelines.

Step 4: Sand the Filler

• Initial Sanding: Once cured, use 400-grit sandpaper to sand the filled area until smooth and even with the original surface.
• Final Wet Sanding: Use wet sandpaper (grit 2000 or 3000) to achieve a fine finish. This step will help prepare the surface for painting.

Step 5: Prime the Surface

• Apply Primer: Spray primer over the prepared area to create a base for the paint. Ensure even coverage and let it dry.

Step 6: Paint the Area

• Mix Your Car Color: Prepare the car paint according to the color code for your vehicle.
• Spray Paint: Apply the car paint in light, even coats. Allow each coat to dry before applying the next one. Aim for a total of 2-3 coats for best results.

Step 7: Apply Clear Coat

• Prepare Clear Coat: Mix the two-component clear coat as per instructions.
• Spray Clear Coat: Apply the clear coat over the painted area to protect the finish and add shine. Allow it to dry thoroughly.

Step 8: Polish the Area

• Polish the Repair: Once the clear coat has cured, use a polishing machine with a coarse polishing pad and rubbing compound to polish the area. This will blend the repair with the surrounding paint and enhance the shine.
• Final Touch: Wipe the area with a clean cloth to remove any residue.

Conclusion

By following these steps, you can effectively repair rust on your car and restore its appearance. Remember to take your time during each phase, especially when sanding and painting, to achieve the best results. If you're new to this process, consider practicing on a less visible area first. Happy repairing!