PS4 Won't Read Discs Fix (Makes Noise/Won't Accept Discs)

Introduction

This tutorial provides a step-by-step guide to fixing a PS4 that won't read discs, often characterized by unusual noises or failure to accept discs. By following these instructions, you can potentially restore your console's optical drive functionality.

Step 1: Gather Necessary Tools

Before starting the repair, ensure you have the following tools and materials:

• Protech Toolkit
• Torx Security T8 screwdriver
• PH00 Phillips screwdriver
• Tweezer set
• Electric screwdriver
• Thermal paste
• Canned air

Additionally, for advanced repairs, consider these tools:

• Hakko hot air station
• Nozzle for hot air station
• Hakko soldering station
• Hakko air filter
• Microscope
• Kester solder

Tip: Use a well-lit workspace to avoid losing small screws and parts.

Step 2: Disassemble the PS4

Carefully disassemble your PS4 to access the optical drive:

1. Remove the outer casing:

   • Use the Torx Security T8 screwdriver to unscrew the back and side panels.
   • Keep track of all screws and parts.

2. Disconnect the optical drive:

   • Locate the optical drive inside the PS4.
   • Carefully unplug any cables connected to it.

Warning: Handle internal components with care to avoid static damage.

Step 3: Inspect the Optical Drive

Once you have access to the optical drive, check for common issues:

• Look for any visible damage or debris in the optical drive.
• Clean the lens gently with a soft cloth or canned air.

Common Pitfall: Avoid using abrasive materials that could scratch the lens.

Step 4: Repair or Replace Rollers and Connecting Rod

The rollers and white connecting rod often cause reading issues. Follow these steps:

1. Remove the optical drive cover:

   • Unscrew and gently lift off the cover to expose the rollers.

2. Inspect and clean the rollers:

   • Check for dirt or grime that may impede operation.
   • Clean with a soft cloth or use canned air.

3. Replace damaged components:

   • If the rollers or connecting rod are damaged, consider replacing them.
   • You can order replacement parts from trusted sources.

Tip: Ensure all parts are correctly seated during reassembly.

Step 5: Reassemble the PS4

After repairs, it’s time to put your PS4 back together:

1. Reconnect the optical drive:

   • Plug all cables back securely.

2. Reattach the outer casing:

   • Ensure all screws are tightened and the casing is aligned properly.

3. Test the console:

   • Power on the PS4 and insert a disc to check if it reads correctly.

Real-world Application: Regular maintenance of your console can prevent future issues.

Conclusion

By following these steps, you should be able to fix your PS4's disc reading issue. Always handle components carefully and keep your workspace organized. If problems persist after these repairs, it may be time to consult a professional or consider further replacement options. Happy gaming!