Вертикальная СМА Electrolux. Сильно шумит. Замена подшипников.

Introduction

This tutorial provides a step-by-step guide on how to replace the bearings in a vertical Electrolux washing machine. If your washing machine is making a loud noise during operation, it may be due to worn-out bearings. This guide will help you understand the replacement process, ensuring that your machine operates quietly and efficiently.

Step 1: Prepare for the Repair

• Gather Tools and Materials: You'll need the following items:
  • New bearings suitable for your Electrolux model
  • Screwdrivers (both flat and Phillips)
  • Pliers
  • A hammer
  • A sealant or adhesive
  • A replacement seal (if necessary)
• Unplug the Washing Machine: Always disconnect the power supply before starting any repair work to avoid electrical hazards.
• Remove Any Water: Ensure the drum is empty and drain any remaining water to prevent spills.

Step 2: Access the Drum Assembly

• Remove the Top Panel: Use a screwdriver to unscrew and lift the top panel off the machine.
• Take Out the Control Panel: Carefully detach the control panel to access the internal components.
• Detach the Drum: Unscrew and remove the drum from the washing machine. This may involve disconnecting hoses and wiring. Take note of where everything connects for reassembly.

Step 3: Replace the Bearings

• Inspect the Old Bearings: Before removing, examine the old bearings for any visible damage or wear.
• Remove Old Bearings:
  • Use a hammer and a suitable tool (like a punch) to drive the old bearings out of their housing.
  • Be careful not to damage surrounding components during this process.
• Clean the Bearing Housing: Ensure that the housing is clean and free of debris before installing new bearings.

Step 4: Install New Bearings

• Insert New Bearings:
  • Place the new bearings into the housing carefully.
  • Use a hammer to gently tap them into place, ensuring they are seated properly.
• Apply Sealant: If required, apply sealant or adhesive around the bearing to secure it.

Step 5: Reassemble the Washing Machine

• Reattach the Drum: Carefully position the drum back into the machine, reconnecting any hoses or wiring as noted earlier.
• Reinstall the Control Panel: Secure the control panel back in place, ensuring all connections are tight.
• Replace the Top Panel: Screw the top panel back on to complete the assembly.

Conclusion

By following these steps, you can successfully replace the bearings in your Electrolux vertical washing machine, eliminating excessive noise and restoring its functionality. Ensure you test the machine after the repair to confirm everything is working correctly. If you encounter any issues, it may be beneficial to consult a professional technician. Regular maintenance can help prevent future bearing failures, keeping your washing machine running smoothly.