ClosetM's How We Measure Blazers and Suit Jackets

Introduction

This tutorial provides a clear and concise guide on how to measure blazers and suit jackets effectively. Understanding these measurements is crucial for ensuring a proper fit, whether you are buying, selling, or tailoring a suit. Accurate measurements can help prevent returns and dissatisfaction with the fit of a garment.

Step 1: Gather Your Tools

Before you start measuring, make sure you have the following tools on hand:

• Measuring tape (preferably a flexible one)
• Notepad and pen (to record measurements)
• A well-fitted shirt or garment (for reference if needed)

Step 2: Measure the Chest Width

To get the chest measurement:

1. Lay the blazer or suit jacket flat on a surface.
2. Locate the armpit seam on one side.
3. Measure from the armpit seam across to the opposite side's armpit seam.
4. Record the measurement in inches.

Tip: For a more accurate measurement, ensure the jacket is buttoned and smoothed out.

Step 3: Measure the Shoulder Width

To measure the shoulder width:

1. Identify the shoulder seam on one side of the jacket.
2. Measure from the edge of the shoulder seam to the edge of the shoulder seam on the opposite side.
3. Note this measurement.

Common Pitfall: Avoid measuring diagonally; keep the tape measure straight across.

Step 4: Measure the Sleeve Length

To measure the sleeve length:

1. With the jacket laid flat, locate the shoulder seam.
2. Measure from the shoulder seam down to the end of the cuff.
3. Write down the sleeve length.

Tip: For a more accurate measure, you can also try the jacket on if possible.

Step 5: Measure the Jacket Length

To find the jacket length:

1. Place the jacket flat on a surface.
2. Measure from the top of the collar (at the back) down to the bottom hem of the jacket.
3. Record this measurement.

Practical Advice: This measurement is particularly important for determining the overall silhouette of the blazer.

Step 6: Measure the Waist Width

For waist measurement:

1. Lay the jacket flat.
2. Measure across the waist area, which is typically a few inches above the bottom hem, from side seam to side seam.
3. Document the measurement.

Tip: Ensure the jacket is not pulled tight while measuring.

Step 7: Measure the Hip Width

To measure the hip width:

1. With the jacket still flat, find the widest part, usually a few inches above the bottom hem.
2. Measure from one side seam to the other.
3. Write down this measurement.

Conclusion

By following these steps, you can accurately measure blazers and suit jackets, ensuring a perfect fit whether you are purchasing or selling. Remember to keep your measurements consistent and refer back to this guide whenever needed. If you have any questions or need further assistance, feel free to reach out through the eBay store mentioned in the description. Happy measuring!