How To Fix A Windshield Crack Using Permatex Windshield Repair Kit

Introduction

This tutorial will guide you through the process of repairing a windshield crack using the Permatex Windshield Repair Kit. This method is a cost-effective solution for minor cracks and chips, helping to restore visibility and maintain the integrity of your windshield.

Step 1: Gather Your Materials

Before starting the repair, ensure you have all the necessary materials. You will need:

• Permatex Windshield Repair Kit
• Clean microfiber cloth
• Razor blade or similar tool
• Tape (optional)

Tips

• Choose a dry and warm day for the best results, as temperature can affect the resin curing process.
• Make sure your windshield is clean and free from dirt or debris.

Step 2: Prepare the Area

1. Clean the crack area: Use a microfiber cloth to clean the area around the crack, removing any dust or dirt.
2. Inspect the crack: Check the depth and length of the crack to ensure it is suitable for repair. Small cracks (up to six inches) or chips can be repaired effectively.

Common Pitfalls

• Avoid repairing cracks that are too large or those that obstruct the driver’s view, as they may require professional attention.

Step 3: Apply the Resin

1. Open the kit: Follow the instructions in the Permatex kit to locate the resin and applicator.
2. Insert the injector: Position the injector over the crack, ensuring it seals properly to prevent leaks.
3. Fill with resin: Squeeze the resin into the injector and allow it to flow into the crack completely.

Practical Advice

• Apply pressure to the injector to force the resin deeper into the crack for a better seal.

Step 4: Cure the Resin

1. Let it sit: Allow the resin to cure as per the instructions provided in the kit, usually for about 10-20 minutes.
2. Use UV light if included: If your kit comes with a UV curing light, use it to expedite the curing process.

Tips for Success

• Ensure the area is not disturbed during curing to avoid trapping air bubbles in the resin.

Step 5: Finish the Repair

1. Remove the injector: Carefully detach the injector from the windshield.
2. Scrape excess resin: Use the razor blade to gently scrape away any excess resin that has squeezed out during the application.

Final Checks

• Inspect the repair for any air bubbles or imperfections. If necessary, repeat the resin application process.

Conclusion

Repairing a windshield crack with the Permatex Windshield Repair Kit can save you time and money while enhancing your vehicle's safety. By following these steps, you can effectively restore the integrity of your windshield. For more extensive damage, consider consulting a professional. Always keep a repair kit handy for future incidents.