2013 Toyota Corolla S 1 8 L oil change first change how to
2 min read
8 months ago
Published on Apr 22, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
How to Change the Oil in a 2013 Toyota Corolla S 1.8L
- Gather Your Supplies:
- Container for used oil
- Oil filler
- Wrench
- Special socket 9/16 and 14 millimeter
- 04152-YZA6 oil filter with the ring paper filter design
- Oil (recommended: 5W20)
- Gloves for protection
- Prepare for the Oil Change:
- Locate the oil drain plug underneath the car.
- Loosen the drain plug using the wrench by turning it Lefty Lucy.
- Drain the old oil into the container.
- Replace the Oil Filter:
- Locate the oil filter canister.
- Remove the safety clip on the canister and unscrew the cap.
- Remove the old oil filter and clean the area.
- Place the new oil filter in the canister, ensuring it fits snugly.
- Apply some oil around the filter ring.
- Screw the cap back on and secure it tightly.
- Refill with New Oil:
- Add the recommended amount of new oil (SAE 5W20) through the oil filler.
- Check the oil level using the dipstick to ensure it's at the correct level.
- Reset the Oil Change Reminder:
- Check the manufacturer's recommendations for the next oil change interval.
- Reset the oil change reminder on your vehicle's dashboard.
- Final Steps:
- Clean up any oil spills and residue.
- Start the car to circulate the new oil.
- Check the oil level again to ensure it's within the recommended range.
- Maintenance Tips:
- Ensure the oil canister safety clip is properly secured.
- Use the correct oil viscosity as recommended by the manufacturer.
- Follow the maintenance schedule for regular oil changes to keep your engine running smoothly.
Congratulations! You have successfully changed the oil in your 2013 Toyota Corolla S.