nissan murano cvt transmition fluid change

Introduction

Changing the CVT (Continuously Variable Transmission) fluid in a Nissan Murano is an essential maintenance task that helps ensure smooth operation and prolongs the lifespan of your vehicle. This guide provides a step-by-step tutorial on how to perform this task, making it accessible even for those with basic mechanical skills.

Step 1: Gather Your Supplies

Before starting the fluid change, ensure you have the following items ready:

• CVT fluid (check the specifications for your Murano model)
• A funnel
• A drain pan
• A ratchet and socket set
• A torque wrench
• A new transmission filter (if applicable)
• Rags for cleaning

Tip: Always use manufacturer-recommended CVT fluid to maintain optimal performance.

Step 2: Prepare the Vehicle

1. Park on a Level Surface: Ensure your Nissan Murano is on a flat surface to avoid fluid spillage.
2. Engage the Parking Brake: This prevents the car from rolling while you work.
3. Raise the Vehicle: Use a jack to lift the front of the car and place it securely on jack stands.

Step 3: Locate the Drain Plug

1. Identify the Transmission Drain Plug: Refer to your vehicle’s service manual for the exact location.
2. Inspect for Damage: Ensure that the area around the plug is clean and free of debris.

Step 4: Drain the Old Fluid

1. Position the Drain Pan: Place the pan under the drain plug to catch the old fluid.
2. Remove the Drain Plug: Use a ratchet and socket to unscrew the drain plug carefully.
3. Allow Fluid to Drain Completely: Let the old CVT fluid drain into the pan. This may take several minutes.

Step 5: Replace the Transmission Filter (Optional)

1. Locate the Filter: If your model has a transmission filter, find its location (refer to your manual).
2. Remove the Old Filter: Unscrew or unclip the old filter.
3. Install the New Filter: Place the new filter in position and secure it according to specifications.

Step 6: Add New CVT Fluid

1. Reinstall the Drain Plug: Once the old fluid is fully drained, reinsert and tighten the drain plug using a torque wrench to the manufacturer’s specifications.
2. Use the Funnel: Insert the funnel into the dipstick tube or designated fill area.
3. Pour in New CVT Fluid: Slowly add the new CVT fluid until it reaches the appropriate level.

Tip: Check the fluid level using the dipstick after adding fluid, and adjust as necessary.

Step 7: Check for Leaks

1. Start the Engine: Let the engine run for a few minutes.
2. Shift Through Gears: Cycle through all transmission gears to circulate the new fluid.
3. Inspect for Leaks: Look under the vehicle for any signs of leaking fluid.

Conclusion

Changing the CVT fluid in your Nissan Murano is a straightforward process that can help maintain your vehicle's performance. Regularly checking and replacing the fluid as needed is crucial to avoiding transmission issues. If you're unsure or uncomfortable performing this task, consider consulting a professional mechanic.