Jailbreak the PS4 on 11.00 with a Raspberry Pi

Introduction

This tutorial will guide you through the process of using a Raspberry Pi to automatically jailbreak a PS4 running version 11.00. By following these steps, you will be able to utilize the Raspberry Pi effectively for this purpose, which can enhance your gaming experience by allowing you to run custom software and games.

Step 1: Prepare Your Raspberry Pi

• Download Required Software

  • Obtain the PI-Pwn software:
    • PI-Pwn (Same as video)
    • PI-Pwn (Latest Version)
  • Download Raspberry Pi Imager from here.
  • Get Putty for terminal access from Putty.org.

• Install Raspberry Pi Imager

  • Install the Raspberry Pi Imager on your computer.

• Set Up the SD Card

  • Insert the SD card into your computer.
  • Open Raspberry Pi Imager, select the downloaded PI-Pwn image, and write it to the SD card.

Step 2: Configure Your Raspberry Pi

• Boot the Raspberry Pi

  • Insert the SD card into the Raspberry Pi and power it on.

• Connect to the Network

  • Ensure your Raspberry Pi is connected to the internet via Wi-Fi or Ethernet.

• Open Putty

  • Launch Putty on your computer.
  • Connect to your Raspberry Pi's IP address (find through your router's connected devices list).

• Log In

  • Use the default credentials:
    • Username: pi
    • Password: raspberry

Step 3: Run the Jailbreak Script

• Navigate to the PI-Pwn Directory

  • In the Putty terminal, enter the following command:

    cd /home/pi/PI-Pwn
    

• Execute the Jailbreak Script

  • Run the script by typing:

    ./jailbreak.sh
    

  • Follow any on-screen instructions to complete the jailbreak process.

Step 4: Connect PS4 and Raspberry Pi

• Ensure PS4 is Ready

  • Make sure your PS4 is powered on and connected to the same network as the Raspberry Pi.

• Use the Raspberry Pi as a Host

  • The Raspberry Pi will act as a host for sending the jailbreak payload to the PS4.

• Access the PS4 Browser

  • Open the PS4 web browser and enter the provided IP address of your Raspberry Pi.

Conclusion

You have now successfully set up your Raspberry Pi to jailbreak your PS4 on version 11.00. Remember to follow all instructions carefully, and ensure your devices are connected properly. For further enhancements, consider configuring GoldHEN by following additional guides available on the channel. Always keep your software updated to the latest versions for the best experience. Happy gaming!