HOW TO CLEAN A DIRTY VACUUM / BAGLESS / SHARK DUO CLEAN / CLEANING MOTIVATION 2024

Introduction

Cleaning your vacuum can seem like a daunting task, especially if it has accumulated dirt and grime over time. This tutorial will guide you through the process of cleaning a Shark Duo Clean Liftaway vacuum, but the methods are applicable to most bagless vacuum cleaners. You'll be equipped with practical tips and steps to restore your vacuum to its optimal condition.

Step 1: Gather Your Cleaning Supplies

Before you start, ensure you have the following supplies:

• Flash all-purpose cleaner (or similar)
• Giant car sponge
• A scrubbing brush or an old toothbrush
• A bucket of warm water
• Pink stuff paste (optional)
• Microfiber cloth or dishcloth
• Mr Sheen (for polishing)

Step 2: Clean the Dust Bin and Casing

1. Remove the dust bin from the vacuum and empty any contents.
2. Wash the dust bin:
   • Fill a bucket with warm water and add the Flash cleaner.
   • Use the giant car sponge to scrub the inside and outside of the dust bin thoroughly.
   • Rinse with clean water and set aside to dry.

Step 3: Clean Attachments and Filters

1. Clean attachments:
   • Place all vacuum attachments into the warm soapy water.
   • Scrub with the car sponge or a scrubbing brush.
2. Wash the filters:
   • If your vacuum's filters are washable, toss them in the washing machine on a gentle cycle for a thorough clean.

Step 4: Remove and Clean Rollers

1. Detach the rollers from the vacuum.
2. Soak the rollers in clean water.
3. Scrub off grime:
   • Use your scrubbing brush to remove any hair or debris stuck to the rollers.
   • Change the water frequently to avoid reapplying dirt.

Step 5: Tackle Stubborn Grime

1. Use a 2p coin to remove stubborn parts if applicable.
2. Scrub with the brush:
   • Carefully clean around the roller area and other hard-to-reach spots.
   • For particularly tough scuff marks, apply a small amount of pink stuff paste to a damp cloth and scrub.

Step 6: Clean the Vacuum Body

1. Wipe down the vacuum body:
   • Use a clean cloth and the Flash cleaner to wipe the outer casing.
   • Pay attention to any scuff marks and remove them as necessary.

Step 7: Clean the Wheels

1. Scrub the wheels with a brush to remove dirt.
2. Rinse and dry the wheels thoroughly.

Step 8: Reassemble and Polish

1. Once all parts are clean and dry, reattach the dust bin, rollers, and attachments to the vacuum.
2. Polish the vacuum:
   • Apply Mr Sheen to a cloth and wipe down the vacuum for a shiny finish.
   • Use a paintbrush to reach intricate areas and remove any remaining dust.

Conclusion

Congratulations on cleaning your vacuum! You’ve restored its performance and appearance, which can enhance its efficiency in cleaning your home. Remember to make vacuum maintenance a regular part of your cleaning routine to avoid buildup in the future. Happy cleaning!