How to remove STICKY RUBBER COATING from plastic | The BEST + CHEAPEST METHOD!

How to Remove Sticky Rubber Coating from Plastic: Step-by-Step Tutorial

1. Gather Your Materials:

   • Plastic item with sticky rubber coating (e.g., synthesizer side panels)
   • Denatured alcohol (methylated alcohol fuel)
   • Paper towels or a cloth
   • Optional: Tape, screwdriver (for disassembly)

2. Prepare the Plastic Item:

   • If applicable, remove any knobs or detachable parts from the plastic item to make the cleaning process easier.

3. Choose the Right Cleaning Solution:

   • Avoid using WD-40 or brake cleaner as they can be less effective and have strong odors.
   • Opt for denatured alcohol as it is a cost-effective and efficient solution for removing sticky rubber coatings.

4. Apply Denatured Alcohol:

   • Pour a small amount of denatured alcohol onto a paper towel or cloth.
   • Rub the alcohol-soaked towel onto the sticky rubber coating on the plastic item.

5. Scrub the Sticky Coating:

   • Rub the affected areas of the plastic item with the denatured alcohol-soaked towel.
   • Apply pressure and scrub vigorously to dissolve the rubber coating.

6. Monitor Progress:

   • As you scrub, you will notice the rubber coating dissolving and transferring onto the paper towel.
   • Continue rubbing until the sticky residue is removed completely.

7. Inspect and Repeat if Necessary:

   • Check the cleanliness of the plastic item and repeat the process if any sticky residue remains.
   • Ensure that all the rubber coating is removed for a smooth finish.

8. Final Touches:

   • Once the sticky rubber coating is removed, clean the plastic item with a dry cloth to remove any remaining alcohol residue.
   • Enjoy the restored appearance of the plastic item without the sticky coating.

9. Optional: Adjust the Finish (If Desired):

   • If the plastic item had a matte finish due to the rubber coating, consider using fine sanding paper to restore a matte appearance.
   • Be cautious while sanding to avoid scratching the plastic surface.

10. Share Your Experience:

    • Leave a comment on the video or share your results with the community to help others with similar issues.
    • Consider using affiliate links provided by the creator for future purchases to support their content.

11. Maintenance and Care:

    • Store the cleaned plastic item properly to prevent the rubber coating from becoming sticky again.
    • Regularly clean the item with a damp cloth to maintain its appearance.

12. Spread the Word:

    • If you found the method effective, give the video a thumbs up and share it on social media to help others facing similar challenges.

By following these steps, you can effectively remove sticky rubber coating from plastic items using denatured alcohol, restoring their appearance and functionality.