Removal of Full Glue Tempered Glass From ONEPLUS 11R | No Uv Tempered Glass For Curved Screen

Introduction

This tutorial provides a detailed guide on how to safely remove full glue tempered glass from the OnePlus 11R. The process is essential for those looking to replace or repair their screen without damaging the device. Follow these steps to ensure a smooth removal.

Step 1: Gather Necessary Tools

Before starting the removal process, make sure you have the following tools ready:

• Plastic Pry Tool: Helps to gently lift the glass without scratching the screen.
• Heat Gun or Hair Dryer: To soften the adhesive for easier removal.
• Microfiber Cloth: To clean the screen after removal.
• Isopropyl Alcohol: For any residue cleanup post-removal.

Step 2: Power Off Your Device

To prevent any accidental damage or short circuits, power off your OnePlus 11R completely before starting the removal process.

Step 3: Apply Heat to Soften Adhesive

Use the Heat Gun or Hair Dryer

• Set it to a low heat setting.
• Hold it about 6-8 inches away from the screen.
• Move it around to evenly heat the edges of the glass for about 30-60 seconds.

Tip

: Avoid overheating to prevent damage to the screen or internal components.

Step 4: Insert the Pry Tool

1. Find the Edge:

   • Look for a gap between the glass and the device frame.

2. Insert the Plastic Pry Tool:

   • Gently slide the tool into the gap.
   • Start at one corner and slowly work your way around the edge.

Common Pitfall

: Be cautious not to insert the tool too deep, as this can damage the internal components.

Step 5: Lift the Glass

1. Gently Lift:

   • Once you have loosened the edge, carefully lift the glass using the pry tool.
   • Work your way around the device, applying gentle pressure to keep the glass lifted.

2. Continue Heating if Necessary:

   • If you encounter resistance, apply more heat to the area to soften the adhesive further.

Step 6: Remove the Glass

1. Complete the Removal:

   • Once all edges are loosened, carefully lift the glass off the device.
   • Place it aside on a soft surface to avoid scratches.

2. Clean the Screen:

   • Use the microfiber cloth and isopropyl alcohol to clean any adhesive residue left on the screen.

Conclusion

Removing the full glue tempered glass from your OnePlus 11R can be done with the right tools and techniques. Remember to be patient and gentle throughout the process to avoid damaging your device. If you're planning to install a new tempered glass, ensure the screen is clean and free of any dust or residue. Happy repairing!